[Fix] DNS Server Not Responding/Isn’t Responding Error

Windows errors can be fixed easily just by troubleshooting them using Windows built-in troubleshooter, but some need manual work just like tap to load Snapchat. While browsing the internet, you might have faced a “DNS Server is Not Responding Error” too. DNS server not responding error on Windows is one of the most annoying errors and most internet users face and it doesn’t even tell you about its cause and the culprit. If you are among them who are facing your computer is trying to use a DNS server that is an incorrect error then here on this page you can find methods to solve DNS server is not responding error on Windows.

How To Fix DNS Server Not Responding

When your internet fails to locate or the DNS server doesn’t respond, it shows you that your computer appears to be correctly configured, but the device or resource (DNS server) is not responding problem. You can also try clearing browser cache and cookies because sometimes it works for this error. If you have any other device at home, then try opening the website in it, and check if the DNS server unavailable error still shows. If yes, then follow the steps mentioned below for the DNS server isn’t responding Windows 10 fix.

What Is DNS Server Not Responding?

DNS stands for Domain Name System and this is the only system that is responsible for converting alphanumeric domain names into numeric IP addresses. Whenever a user types a web address in his browser, the address is further sent to the DNS server. If the response from the (Domain Name Server) DNS server doesn’t fail, then the website opens correctly. While if the response fails, you can not access the website, and the error message “The (Domain Name Server) DNS server is not responding” appear.

Causes of The DNS Server Is Not Responding Error:

This primary DNS server not responding router problem can often be caused because of server outage and in that case you’ll have to wait for the website to get in the running position back to access it. While the causes of no internet DNS server not responding error can be different for everyone and some of them are listed below:

  1. The server which you are trying to access may be temporarily down due to technical reasons.
  2. The DNS service in your computer is corrupted or not working.
  3. There are chances that the firewall or security software of your system might have blocked your PC from communicating with a website or certain websites.

How To Fix DNS Server Not Responding & DNS Server Isn’t Responding

Change The DNS Server Addresses

Your system automatically obtains DNS servers whenever you connect to the internet, but sometimes it fails to do so. If the DNS server is not responding, then you can try using OpenDNS and Google DNS servers manually for your system. They both are considered as best DNS servers around the world and even if you are facing a DNS server not responding wireless error then you can consider applying this fix. Here’s how to use them manually and how to solve DNS server isn’t responding error using them.

  • First of all right on the network icon from the taskbar of your Windows computer, and click on Open Network and Sharing Center.
  • Once you are in Open Network and Sharing Center, you’ll find the internet connection you are using.
  • Under its name, click on Local Area Connection and then select Properties.
  • Now a new window will pop-up on your screen, now find and select Internet Protocol Version 4 (TCP/IPv4). Then click on Properties.
IPv4 Properties
  • You will be taken to IPv4 settings of your computer, now by default Obtain DNS Server Address Automatically will be select.
  • Select the other option: Use The Following DNS Server Addresses
  • Now enter the below DNS servers in the given field.

Preferred DNS Server –
Alternate DNS Server –

  • Check the Validate Settings Upon Exit box and click OK.
Google DNS Servers
  • Once you have done this, just restart your system once to make changes to it.

Flush DNS To Fix DNS Server Error No DNS Server

You can also use Command Prompt to fix DNS server not responding issues by flushing the DNS of your system. This problem can also be caused by corrupted IP and Winsock, so you can use CMD commands to fix this issue. You can also find Best Websites To Bypass Online Surveys on this website. If you don’t know how to flush DNS in Windows using Command Prompt, then you can follow the steps mentioned below for a quick Windows DNS server isn’t responding fix:

  • First of all right click on the start button and select Command Prompt (Admin) to run CMD with administrative privileges.
  • When you are in the CMD window, just put the below commands one by one and keep pressing Enter after each command:

ipconfig /flushdns
ipconfig /registerdns
ipconfig /release
ipconfig /renew
netsh winsock reset

Fix DNS CMD Commands
  • Once you’ve run all of the above-mentioned commands in the CMD window, just restart the computer and check if this Windows 10 DNS server not responding fix worked for you or not.

Disable Unused Network [Most Worked]

Windows have some network connections installed which don’t get used by any other programs or by Windows itself. You can try disabling them so that you don’t have any kind of connection issue and secure DNS can’t run on this network kind of problem. This is one of the best methods to fix the primary DNS server not responding Windows 10/8/7. If you don’t know where to find these connections, then just follow the steps mentioned below.

  • First of all press Windows Key + R to open the RUN box.
  • Now, in run box type ncpa.cpl and press Enter.
  • A new window will open with all of the connections available for your system.
  • You can also find the network connections by navigating to Start > Control Panel > Network and Internet > Network and Sharing Center > Change Adapter Settings.
  • Now you can find out which connection are you using for internet access.
  • You can disable one after another to check which connection was creating the problem.
Disable Unused Network

If you actually know what does DNS server not responding means then you can easily figure out the solutions that work best for you including the Mi account unlock tool. If you are still facing a Device or resource (DNS Server) is not responding problem, then you can try other methods mentioned below.

My DNS Server Isn’t Responding: Change MAC Address

If you don’t know, then let us tell you that every network hardware component has its own unique MAC address assigned to it. Though this setting should remain unchanged, but sometimes when you want to solve DNS server is not responding error in Windows and DNS error like DNS server isn’t responding, then you might need to enter your MAC address manually. You can also follow the below steps to fix DNS server not responding Windows 7:

  • First of all, open Command Prompt (Admin) with administrative privileges.
  • In the Command Prompt window, just enter ipconfig /all and press Enter.
  • Now wait for a few seconds and a list of network-related settings will show up on your screen.
  • Now scroll down and locate Physical Address and write it down somewhere so you can remember it.
IPConfig Physical Address
  • Open Network Connections now, from Network and Sharing Center.
  • Now select your current network, right-click on it and select Properties from the drop-down menu.
  • A new pop-up window will appear on your screen, and you have to click on Configure.
Configure MAC Address
  • Navigate to the Advanced Tab and select Network Address from the Property list.
  • On the right side, select Value and enter the MAC address which you have copied before from the CMD window.
Change MAC Address
  • Do note that you don’t have to put any dashes in the MAC address and just paste it without dashes.
  • Now simply click OK to save changes.

Install Latest Network Adapter Drivers

All of the software and hardware run on drivers and needed the latest drivers in order to work properly. There are chances that why are you facing the DNS server is not responding error is because of outdated network drivers. Now you can either visit the network adapter manufacturer’s website to download the latest drivers or use Windows built-in device manager feature to look for the latest drivers of your network adapters. Remember that to fix the DNS server not responding Windows 8 you will have to update only the network drivers and not others. Here’s how to do it:

  • Right-click on the start button or press Windows Key + X and select Device Manager from the list.
  • Now a new window will appear on your screen with all of the hardware installed.
  • Now scroll down and expand the Network Adapters category and select your Network Adapter.
  • Right on the network adapter you are using and select Uninstall Device.
Uninstall Network Adapter Drivers
  • If a confirmation box appears on your screen, then just select Delete Driver Software For This Device and click OK.
  • Once the drivers are uninstalled for your network adapter, just restart your system once to make changes.
  • When you will start your system again, then the default network driver will be installed automatically.
  • Now you can check whether the DNS server is not responding fix worked or not.

Try Connecting in Safe Mode

Whenever you are facing any problems with your computer or something like the DNS server isn’t responding to Windows 10, then you can try booting it into Safe Mode. Safe Mode is one of the best ways to know that if any third-party software is blocking the internet or if there are some other issues with quote on Discord kind of apps.

  1. To do this, just restart your device, and hold down the F8 Key.
  2. A list of all possible booting options will get displayed on your screen.
  3. Select Safe Mode With Networking and press Enter.
Safe Mode With Networking

Once booted you can check whether you are able to use the internet or not. This is one of the most commonly used methods for Windows DNS server not responding fix. Now you already know what to do when the DNS server isn’t responding and if you are not able to fix this problem by the methods mentioned above, then you can ask us for help via comments below.

Disable Your Firewall and Anti-Virus

Though antivirus and firewall are necessary components for Windows devices to keep your device secure, but sometimes they may interfere with your connection with the internet. If you are getting error messages like Comcast DNS server not responding, or Device or resource (DNS Server) is not responding, then you can try disabling them for once.

If you’re using Bit-defender, you need to go to Firewall settings and disable the Block Internet connection sharing option. It is an easy way on how to fix DNS not responding errors. If you are using Avast, then to fix Windows DNS server not responding problem, simply open Avast settings and disable the Secure DNS option.

Final Words

DNS server error is one of the most irritating errors one can face while using the internet. If you are also getting some error messages like your computer is trying to use a DNS server that is incorrect, then you may need to fix it to visit those specific websites. Do note that this error is not related to just the internet, but some Windows 10 users have reported that they are getting DNS server not responding error in Windows 10 WiFi too.

Though there are many ways on how to solve DNS server not responding and you can do it yourself using a troubleshooter. StockPop has mentioned top working method to fix DNS server isn’t responding Windows 10/8.1/7. If you know about some more methods to solve the device or resource (DNS Server) is not responding problem, then do let us know about them via comments below.

Leave a Reply

Your email address will not be published. Required fields are marked *